Tips For Replacing a Window Handle
It is easy to change your window handle from the convenience of your own home. Follow these steps to ensure an elegant and smooth finish.
Begin by removing upvc replacement door handles Repair My Windows And Doors covers to expose the screws within your uPVC window handle. Measure the spindle to make sure you are getting the correct size replacement.
1. Measure the Spindle Length
It is essential to ensure the correct size of the spindle when replacing a window handle. This is because it could determine how tight or loose the handle is and whether it locks correctly in the frame of the window. The spindle is the steel shaft that connects to the handle and the lock in the frame of the window. The spindle can be found in the standard cross-section of 8mm for industry or older 9mm versions. The current industry standard is 8mm, but this was not always the case. When purchasing a new handle, it is important to check the dimensions.
Remove the handle. This is done by turning the handle into the open position, and unscrewing two screws that secure the handle (which are often hidden behind plastic caps which are required to be removed). After the handle is removed, take a measurement from the base to the point at which it ends. This will provide you with the measurements you need to buy a replacement.
There are many options to consider when choosing a new window handle, from sleek chrome that fits into a contemporary home to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more classic Tudor cottages with curved monkey tail latches! The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are typically used to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles vary between 58mm and 62mm, but luckily there are replacements available for both sizes. Window handles from Cadenza are a different size because they feature an angled blade that functions a multi-point locking mechanism inside the window.
Another factor when choosing the right window handle is knowing which hand you need, this is simply defined by the hand you use to open the door. Inline espag handles can be used with either left or right-handed windows. Cranked window handles are handed and are only used on windows that open in one direction.
2. Remove the Handle
A window handle that has fallen out is a frustrating experience, regardless of whether the handle is damaged or worn out. The good news is, you can repair a uPVC handle yourself. You'll need only some basic hand tools as well as some time to complete the task.
First, you must open the window and make sure it's not locked. Then, you need to remove the screw caps that hold the handle in position. Once these are removed, you can begin working on removing the handle itself.
The handle is attached to a spindle in the window frame. Depending on the kind the handle is secured with a screw or pin. The most commonly used handles are the inline Espagnolette and cockspur handles. Both of these types of handles are used on casement windows, which includes aluminum windows. They can be locked with a key to prevent unauthorised opening of the window from outside or you can lock them by turning the handle clockwise.
To take the handle off, you'll need a screwdriver with a flat blade to remove the clip that holds the handle. Once the clip is released, the handle should be able to slide off the spindle. When the handle is removed, you'll have to determine the length of the spindle and ensure that your new handle is compatible with this measurement.
Once you have the proper size, you can put the new handle in place. You must ensure that the new handle is firmly attached and that it turns in the correct way (clockwise for open and counterclockwise for closed). It is also important to ensure that it isn't installed upside down.
Replace the cap screws. After you've done this then you can test the handle to confirm that it is working properly. Also, you should test the locking mechanism by moving the handle from the locked position, and then back to the locked position.
3. Take off the Screws
A uPVC handle is an important part of any house and is the first thing that shows signs of wear or damage. This could be due natural causes, frequent use, or even damage caused by criminals trying to gain access to your home. But, a simple fix will solve the issue and stop the issue from happening again.
uPVC handles can also be difficult to open when the locking mechanism isn't functioning properly. Often, the problem can be resolved by replacing the multipoint lock instead of the entire handle and it's certainly worth checking this as it can save you money.
Once you've removed your old handle you'll need to remove the screws fixing it to the base. These screws are usually located on the inside of the handle base. It may be necessary to use a screwdriver to do this. Be careful not to tighten too much the handle, as this can cause it to become loose.
You'll then have to locate the fixing screws or pins that keep the new handle in the correct position. These are likely to be located on the inside face of the handle base and you'll need a screwdriver or a pair of pliers to take them off the screws. If you wish to, you can replace the caps on the screw and test the handle to make sure it functions correctly.
When you're ready to install the new handle, simply align the spindle with the cut out in the window mechanism and screw it into place. Make sure the handle is in the open position and that the screws are tightly fixed before replacing the screws' covers should you wish to do this. It's done! You can enjoy the newly installed window handle. Hopefully this will help you avoid the need for expensive window and door replacements in the future. Contact us if you require more information on this or any other aspect of your uPVC window.
4. Fit the New Handle
Whether you're replacing a broken handle or simply changing it, the process is surprisingly simple and can be completed in a matter of a few steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you'll need to finish the job are crucial. Always consider safety when working with windows and tools. Be sure to follow the steps and make sure that you have a handle that is safe for use.
The first step is to find the screws holding your existing window handle and remove them, while keeping an appropriate grip on the handle to prevent it from falling suddenly and causing injury. Once the screws are removed, you can put them in a secure location to be replaced later.
After you have removed the handle, you can now begin to put in your new one. The handle must be fitted perfectly in order to function correctly and keep the window in its closed position. Then move the metal bar that is square on the handle into the hole for the window mechanism.
The last step is to replace the screws caps and then test the handle to make sure it works. If you aren't satisfied with the results or if the window doesn't open and close as it should the next step is to contact our experts who will be able to assist.
The majority of UK homes have uPVC Windows. As such, many will need to be changed at some point due to wear and tear or breakage. The procedure is fairly simple and can be completed by anyone with a bit of knowledge of DIY. The most crucial aspect to the success of this procedure is to ensure that you're using a handle that is compatible with your existing window in terms of size and design. If you're not sure about the type of handle you need, feel free to reach out to our team, who will be able to provide you with the choices available.